特點：

  1、外箱體采用優質冷軋薄鋼板制成，表面噴漆，箱內體用不銹鋼制成。夾層之間填充100 mm硅酸鋁纖維作保溫層，故保溫性能良好。

  2、箱體為封閉式、焊劑用鼓風機抽風負壓吸送方式自動加熱箱內，取用時只需打開出料閥門，所以勞動強度特別低。

  3、不銹鋼加熱元件分三組控制，均勻密集地布置砸焊劑曾內，它的實際使用功率是其本身功率的1/4所以加熱器在控制系統無故障的前提下壽命均達一萬小時以上。

  4、裝有自動控溫裝置，可任意調節烘焙焊劑溫度，溫度達到設定的溫度時，即能自動恒溫。

  5、可隨時向箱內加料，隨時從箱被出料。

  characteristic:
  1. The outer box is made of high-quality cold-rolled steel sheet, the surface is painted, and the box body is made of stainless steel. The interlayer is filled with 100mm aluminum silicate fiber as the thermal insulation layer, so the thermal insulation performance is good.
  2. The box is closed, and the flux is automatically heated in the way of suction and negative pressure suction by blower. Only the discharge valve needs to be opened when it is used, so the labor intensity is particularly low.
  3. The stainless steel heating elements are controlled in three groups, and the welding flux is evenly and intensively arranged. Its actual power is 1/4 of its own power. Therefore, the life of the heaters can reach more than 10000 hours on the premise that the control system is trouble free.
  4. Equipped with automatic temperature control device, the temperature of baking flux can be adjusted at will. When the temperature reaches the set temperature, it can automatically keep constant temperature.
  5. It can be fed into the box at any time and discharged from the box at any time.