1. 安裝之前需要先檢查安裝位置與陶瓷加熱板的規格是否匹配，使用的電壓是否一致。
  2.陶瓷加熱器非防水性結構，所以，存放及使用安裝的時候一定不要與油、水、塑膠粒接觸，以防止漏電。
  3.在使用之后如果發現表面出現焦黑狀的色澤，這就表明了發熱及受熱體的散熱不平衡，應該及時調整，避免出現燒穿的情況。
  4.安裝的時候必須把陶瓷加熱器與被加熱體緊密貼合，受熱體的表面應該平坦完整，無凹凸不平的現象。
  5.加熱使用高溫陶瓷加熱板的時候，應該避免用力敲擊或與硬物相撞造成瓷磚斷裂，合金電阻絲外露會影響其操作壽命
      6. 陶瓷加熱器的工作電壓不應該超過額定值的10%.

1. Before installation, check whether the installation position matches the specification of the ceramic heating plate and whether the voltage used is consistent.
      2. The ceramic heater is not waterproof, so it must not contact with oil, water and plastic particles during storage, use and installation to prevent electric leakage.
      3. If the surface is burnt black after use, it indicates that the heat and the heat dissipation of the heating body are not balanced. It should be adjusted in time to avoid burning through.
      4. During installation, the ceramic heater must be closely connected with the heated body, and the surface of the heated body should be flat and complete without unevenness.
      5. When using high temperature ceramic heating plate for heating, it should be avoided to break the ceramic tile due to strong knocking or collision with hard objects, and the exposure of alloy resistance wire will affect its operation life
      6. The working voltage of ceramic heater should not exceed 10% of the rated value